30 Years continuous production using only British parts!
Outstanding in Design and Performance the Morgo conversion is made to fit any 650c.c Triumph Unit or Pre Unit motor (9 stud head to be used on the latter) without any alterations to any of the standard parts.
No reduction in bolt size or separate liners are employed in this conversion. The cylinder barrel is made from high quality cast iron, cast exclusively for us. The casting is one piece and only weighs a few ounces more than the standard barrel.
Supplied with cycle threads as standard, UNF threads to order only. Fin area increased by 20% to give greater cooling efficiency. We have introduced a fin tower at each side of the barrel to eliminate fin ringing at high speeds and to give more rigidity. Also the fins are much larger to give added cooling and blend in with the shape of the cylinder head. Most important of all the strengthening pillars go up through the fins to give maximum strength to the base of the barrel.
Thread depth lowered by one full fin section to make available the possibility of removing top fin etc., for special purpose building without loss of thread depth, i.e., short stroke motors.
The pistons are manufactured in England by one of the world's largest piston producers. All pistons have cutaways for larger valves.
Standard compression ratio is 9.5 to 1 with a standard gasket. Alternative gaskets are available to give compression ratios of 8.5 to 1 and 10.5 to 1.
The standard range of pistons give the following capacities:-
STD 2.975in. = 740c.c. 45 c/ins.
Care should be taken when using Thruxton Cams on valve to piston clearances.
Now after thirty one years production and continuous research this product is used by thousands of discerning enthusiasts throughout the world.
All kits are now supplied with the Morgo Super Ring Pack which consists of:-
Top Chrome Ring
Our own test machine, which is a 1963 unit 650 Bonneville, reached a speed of 127 m.p.h. at just over 7,000 r.p.m.
The above options are at extra cost.
PLUS .020in. = 750c.c 45 c/ins.
PLUS .040in. = 760c.c. 46.4 c/ins.
2nd ring Morgo M10TP
3rd ring Morgo twin rail oil ring,
All Morgo components are made from the best materials to give long and trouble free service.ADVANTAGES OF USING MORGO
MORE POWER 750cc. No loss in R.P.M.
MORE COOLING Large fins
MORE STRENGTH All one piece
MORE ATTRACTIVE Design blended to head
MORE SILENT Made from cast iron
MORE RELIABILITY Good engineering techniques used
MORE ECONOMY Improved power to weight ratio
MORE EASY TO START Moderate compression ratioMORGO the 207.9 m.p.h. name.
The Conversion comprises of:-
1 Morgo cylinder barrel
2 Standard pistons complete with rings, pins & c/clips.
1 Standard cylinder head gasket. (9.5 to 1)Optional extras at time of ordering:
Cylinders with Thruxton tappet block holes.
U.N.F. Threads.
IMPORTANT
The success of this conversion depends to a large extent on your assessment of the condition of the rest of the engine, obviously worn parts deter performance and may collapse under added power. The variation in the balance factor on fitting this conversion is negligible.
